Tools & Tips

 

 


Compression Wall Clamps

  • Garry asked a question about clamping prepapered foam board walls in an already assembled dollhouse.  The two photos below use a compression style clamp.  A cheap version would be a threaded rod with two couplers at either end.  Between various length rods and wood spacers, it should be inexpensive and quite flexible.  The clamping should be uniform.  Joe Buckler suggested a similar setup.

  • Photo A - clamp in place in a dollhouse room

  • Photo B - various parts of a clamping kit

 

 

Return to Miniature Index